Leopard commands¶

Board-level commands¶

• sml power on

  Powers on Leopard board.

  Powering on brings up only Supervisor portion of Leopard and takes few seconds as sml is waiting for supervisor to report successful boot.

• sml power off

  Powers off entire Leopard board including DPU.

Processing node power¶

• sml pn1/pn2 power on [--nor-image nor1|nor2|nor3|tmr>] [<image>]

  Powers on selected processing node (pn1 or pn2).

  • --nor-image

    Selects SPI flash chip to boot from. Default is tmr.

  • image

    Selects which Linux image bootloader shall load and boot. Defaults to 0.

  Optionally it can select which Linux image bootloader shall load and boot.

• sml pn1/pn2 power off

  Powers off selected processing node (pn1 or pn2).